Skip to the content of the web site.

Information Resources Management Committee

Report for the Ontario Council on Graduate Studies on Library Resources for Mechanical and Mechatronics Engineering
2007

The following is a summary of University of Waterloo (UW) Library information resources and services in support of the graduate program in Mechanical and Mechatronics Engineering, prepared by Douglas Morton, Liaison Librarian for Mechanical and Mechatronics Engineering.

Information Resources

Material is collected to support learning, teaching and research to the Masters and PhD level in Mechanical and Mechatronics Engineering with emphasis on:

The decision to purchase Library materials for Mechanical and Mechatronics Engineering is the responsibility of the Liaison Librarian in consultation with the Faculty Library Representative. Selection is guided by the Collection Development Policy which is developed by the Liaison Librarian in consultation with faculty members in the department of Mechanical and Mechatronics Engineering. Materials are obtained in a variety ways including firm orders, open orders, approval plans, and subscriptions. 

In response to user preference, the Library obtains resources in electronic format whenever it is possible and practical to do so. Some electronic resources are obtained directly by the University of Waterloo Library and some are obtained through membership in the Ontario Council of University Libraries (OCUL) and the Canadian Research Knowledge Network. Access to and use of electronic resources is generally governed by licence agreements with the publisher or vendor.

The UW Library collection includes approximately 360 current ejournals in subject areas of possible interest to Mechanical and Mechatronics Engineering. Many of the electronic serials are paid from the central Electronic Resources library fund. The Mechanical and Mechatronics Engineering library fund supports the cost of 65 current serials subscriptions relating to Mechanical and Mechatronics Engineering. The collection also includes over 38,000 monographs in subject areas directly of interest to Mechanical and Mechatronics Engineering and over 103,000 in all engineering areas. For the most part, these monographs are in print format but an increasing number are in electronic format.

The UW Library, along with the libraries of the University of Guelph (UG) and Wilfrid Laurier University (WLU), is a member of the Tri-University Group of Libraries (TUG) consortium.  Collections from the University of Guelph and Wilfrid Laurier University enhance the depth and breadth of local materials available in subject areas of interest to Mechanical and Mechatronics Engineering such as agricultural engineering, business, and international development.

The Library has purchased or subscribes to a range of electronic resources including research databases, full text journals, monographs, numeric data, and government publications.   In addition, the Library identifies and provides access to select material freely available through the Internet. Such material includes open access journals, catalogues of libraries around the world, dictionaries, encyclopaedias, and style guides.

The following are some of the electronic resources of particular interest to Mechanical and Mechatronics Engineering:

Services

Access to Print Collections

The Library’s print collections for Mechanical and Mechatronics Engineering are housed primarily in the Davis Centre Library.  Access to the entire Library collection, as well materials held by UG and WLU, is available through the Web accessible union catalogue known as TRELLIS (http://trellis1.tug-libraries.on.ca/).

The Library's automated circulation system allows users to charge out materials during the hours that the Library is open (every day most weeks, with some closures between terms and during the Christmas break) and to renew items online anytime. With the exception of the current issues of print journals and reference materials, most of the materials in the Library’s collection circulate. Graduate students and faculty may borrow most monographs for a term at a time.

The Library also delivers to faculty, graduate students, and staff copies of print journal articles from any of the UW library locations, and from the libraries of the UW affiliated and federated colleges and universities. Faculty, graduate students, and staff can also place holds on books from any of these libraries for pickup at any of the UW libraries’ circulation desks.  Books and journal articles not owned by the UW Library but held by UG or WLU may be requested through TRELLIS. Books and copies of journal articles are delivered to faculty, staff and students within three working days. The cost is of these services is absorbed by the Library.

In partnership with UG and WLU, the Library owns a facility, known as the Annex, which is used to house low-use research material.  In keeping with the University’s research intensive status, an agreement among the TUG libraries ensures that a last copy is maintained in perpetuity.  The agreement can be found at: http://www.lib.uwaterloo.ca/staff/irmc/last_copy_agreement_sept06.html.  As with material from UG and WLU, books and copies of journal articles housed in the Annex are made available to faculty, staff and students within three working days. The cost is absorbed by the Library

In addition to the forgoing services, books and copies of articles from print journals will be sent, upon request, to students living some distance from the campus.  With the exception of return postage for books, the cost is absorbed by the Library.

Access to Electronic Resources

The primary tool for accessing electronic resources selected by the Library is its Web site (http://www.lib.uwaterloo.ca). This site organizes and provides access to licensed resources available to only UW faculty, students and staff, as well as Internet resources freely available to anyone.  The site includes links to selected electronic resources available to the UW community through the Library's participation in the OCUL Scholars Portal program (http://www.scholarsportal.info/index.html).  In addition, many of our electronic resources can be found through a search of Google Scholar (http://scholar.google.com/ ) and Windows Live Academic (http://academic.live.com/).

The Library has embedded linking technology (SFX) into research databases which allows users to link directly from the database to the UW Library full text electronic journal subscription or to the TRELLIS catalogue record for holdings and call number information.  The Library also provides access to bibliographic management software.

UW faculty, students and staff may access electronic research databases and full text electronic journals from off-campus via the Library’s Proxy Server / Connect from Home feature.

Access to Resources from Institutions other than TUG

The Interlibrary Loan/Document Delivery (ILL) service provides faculty, students, and staff with books, copies of journal articles, theses, and government documents from libraries within Canada and elsewhere. The UW Library uses OCUL’s RACER Web based interlibrary loan system (http://racer.scholarsportal.info/vdx/index.html) to facilitate ILL access and service for users. With minor exceptions, the cost for this service is absorbed by the Library.

The UW Library also uses the CISTI Source current awareness and document delivery service (http://source.cisti.nrc.ca/index_custom.html) from the Canada Institute for Scientific and Technical Information to provide copies of articles from journals not held by the UW Library or available via document delivery from the University of Guelph or Wilfrid Laurier University. Faculty and graduate students are able to search citations from over 17,000 journals in all subject areas and directly request copies of articles. Articles are generally delivered to on-campus addresses within four working days. The cost is absorbed by the Library.

Canadian university libraries extend in-person borrowing privileges to students, faculty and staff from across the country. Graduate students, faculty and staff are entitled to borrowing privileges at participating libraries (http://www.coppul.ca/rb/rbindex.html).

Information Services

Reference assistance is available in person or by telephone at the Library's Information Desks which are staffed by professional librarians and specially trained library associates. Alternatively, UW students, faculty and staff may get reference assistance via e-mail and on-line chat available through the Ask a Librarian service (http://www.lib.uwaterloo.ca/asklib/index.html).

UW campus libraries also offer general orientation programs including tours, workshops on database searching and using the Web, and seminars for graduate students.  In addition, each fall the Library participates in a campus-wide orientation program for international students.

The Liaison Librarian for Mechanical and Mechatronics Engineering is available for consultation with individuals or small groups of students. He may be contacted directly in person, by phone, and by e-mail if a personal visit to the Library is not convenient.

The Liaison Librarian is also available to work with faculty to develop course integrated library instruction in the form of lectures, hands-on instruction, Web pages, or online courseware modules. The Librarian also develops and maintains a web-based subject guide for Mechanical and Mechatronics Engineering at http://www.lib.uwaterloo.ca/discipline/mecheng/index.html.

Graduate students may keep abreast of new services and developments in the Library by reading news @ your library (http://www.lib.uwaterloo.ca/newsatlib/) an electronic newsletter prepared periodically and distributed to graduate students via the University’s Graduate Studies listserv.

In a 2006 University of Waterloo Library User Satisfaction Survey, 88% of the graduate students responding to the survey indicated that they agreed with the statement that "Overall, the UW Library and its staff meet my expectations for an excellent university library".

Financial Support

Table 1. Summary of Expenditures– Mechanical and Mechatronics Engineering

Year

Serial Expenditure

Book Expenditure

Approval Plan Support

Total Expenditure

1999/00

$202,124

$19,092

$9,221

$230,437

2000/01

$234,643

$17,661

$8,472

$260,776

2001/02

$103,583

$23,030

$9,227

$135,839

2002/03

$106,157

$22,684

$6,835

$135,676

2003/04

$96,324

$19,256

$5,392

$120,972

2004/05

$58,732

$13,872

$4,860

$77,464

2005/06

$59,104

$19,338

$6,640

$85,082

TOTAL

$860,666

$134,934

$50,647

$1,046,247

Totals may not equal sum of components due to independent rounding.

During the past seven years, the Mechanical and Mechatronics Engineering library fund has spent $1,046,247 on information resources. In 2005/06, $59,104 was spent for current serials and $25,978 for books. Table 1 provides further details. What may appear to be a decline in serials expenditures deserves comment. Serials in an electronic format are often available for subscription in packages and the Library pays for access to these packages through a general fund for electronic resources. As a result, many serials are no longer paid for by funds established for specific disciplines.

Electronic resources such as Scopus and ISI’s Web of Science are purchased from the general fund. It should also be noted that materials acquired for other departments in the Faculties of Engineering, Mathematics and Science are also of interest to Mechanical and Mechatronics Engineering.

Conclusion

More detailed information including lists of print and electronic journals purchased for Mechanical and Mechatronics Engineering and the number of monograph titles in subject areas of interest to Mechanical and Mechatronics Engineering are available in the Library.

Publishers of standards (such as ASTM or SAE) and handbooks (such as those from CRC ENGnetBASE) in electronic form charge subscription and ongoing access fees that exceed the capabilities of our budget. Similarly, while Mechanical and Mechatronics Engineering has definitely benefited from consortial and block purchases of ejournals a growing number of desirable publications (such as the Proceedings of the Institution of Mechanical Engineers – both current and archives) are coming onto the market that will need money on an ongoing basis. We have been able to meet the majority of our user’s expectations quite well but to continue in light of users’ preferences for digital formats and expanding programmes (Nanotechnology and Mechatronics) will require a funding increase.

I would be pleased to discuss the Library's holdings and services with the appraisers at the time of a campus visit. I believe that a high level of support for the graduate programme in Mechanical and Mechatronics Engineering has been provided by the Library, both in information resources and services.

Prepared by Douglas Morton, Liaison Librarian for Mechanical & Mechatronics Engineering

Reviewed by Susan Routliffe, Associate University Librarian, Information Resources and Services for Mark Haslett, University Librarian.

Information Resources Management Committee
.
April 17, 2007